NAME
bridge – IPv4 Ethernet bridge

SYNOPSIS
bind –a #Bb /net
/net/bridge
b/ctl
/net/bridge
b/cache
/net/bridge
b/log
/net/bridge
b/stats
/net/bridge
b/n
/net/bridgeb/n/ctl
/net/bridge
b/n/local
/net/bridge
b/n/status

DESCRIPTION
The bridge device bridges IPv4 packets amongst Ethernet interfaces. The number b in the bind is optional and selects a particular bridge (default 0).

The /net/bridge0 directory contains ctl, cache, log, and stats files, and numbered subdirectories for each physical interface.

Opening the ctl file reserves an interface. The file descriptor returned from the open(2) will point to the control file, ctl, of the newly allocated interface. Reading ctl returns a text string representing the number of the interface. Writing ctl alters aspects of the interface. The possible ctl messages are: bind ether name ownhash path
Treat the device mounted at path (e.g., /net/ether0) as an Ethernet medium carrying IPv4 and ARP packets and associate it with this bridge (forward its packets to the other interfaces associated with this bridge). Ownhash is an `owner hash'.
bind tunnel name ownhash path path2
Treat the device mounted at path as a network tunnel carrying IPv4 and ARP packets, the device mounted at path2 as an Ethernet medium carrying IPv4 and ARP packets and associate them with this bridge (forward its packets to the other interfaces associated with this bridge). Read packets from the path interface and write them to the path2 interface. Such tunnels have an MTU of 1400 bytes.
unbind type address [ownhash]
Disassociate the interface associated with address from this bridge. Type must be ether or tunnel.
cacheflush   Clear the cache of (destination MAC address, port) tuples.
delay delay0 delayn
Set the delay0 and delayn parameters. delay0 is the constant microsecond delay per packet and delayn is the microsecond delay per byte.
set option     Set bridge option. The only known option is tcpmss, which limits the TCP Maximum Segment Size of TCPv4 packets passing through to 1300 bytes.
clear option   Clear bridge option.

Reading stats returns statistics about the bridge.

Reading the log file returns data from the bridge's log and will block at end of file awaiting new data.

Reading the cache file prints the cache of (destination MAC address, port) tuples, one entry per line. The format is: the destination MAC (e.g., Ethernet) address in hex, port number, count of packets from this address, count of packets to this address, expiry time in seconds since the epoch, and e for expired entries or v for valid entries.

In a connection subdirectory, ctl and local don't do anything, but status returns a one–line status summary.

EXAMPLES
Set up a network bridge between two Ethernets (#l0 and #l1).
bind –a '#B' /net
bind –a '#l1' /net
echo 'bind ether outer 0 /net/ether0' >/net/bridge0/ctl
echo 'bind ether inner 0 /net/ether1' >/net/bridge0/ctl

SEE ALSO
ip(3)

SOURCE
/sys/src/9/port/devbridge.c

BUGS
Doesn't understand IPv6.